UniFi UPS Tower
€172,60 €212,30 Incl. VAT
The UniFi UPS Tower is a 1000 VA / 600 W line-interactive desktop UPS managed from UniFi, with 5 battery-backed and 5 surge-only C13 outlets and a hot-swappable 108 Wh battery.
It supports Graceful Shutdown for UNVR and UNAS, which needs UniFi OS 4.4.3 or later, and NUT for third-party devices. Output on battery is a simulated sine wave. The 10 outlets are IEC C13, so plan C14 cords for equipment with Schuko plugs.
Key features
- 1000 VA / 600 W, line-interactive, 230V
- Up to 7 minutes at half load (300 W) and 2 minutes at full load
- 5 x C13 battery backup/surge and 5 x C13 surge-only outlets, C14 inlet
- Hot-swappable 12V 9Ah lead-acid battery
- 6 ms typical transfer time
- 2 x GbE ports for surge in/out
- 288 x 99 x 280.5 mm, 7.85 kg
Mechanical
| Dimensions | 288 x 99 x 280.5 mm (11.3 x 3.9 x 11") |
|---|---|
| Weight | 7.85 kg (17.3 lb) |
| Enclosure Material | Polycarbonate and acrylonitrile butadiene styrene blend |
| Form Factor | Desktop |
| Weatherproofing | IP20 |
Hardware
| Management | Ethernet |
|---|---|
| Networking Interface | (1) 100/10 MbE port for network connection (2) GbE ports for surge in/out |
| Power | (1) OVC II AC in: C14 socket, 1.8 m (5.9 ft) removable power cord (5) Battery backup/surge protection: C13 (5) Surge protection: C13 |
| Capacity | 1,000VA/600W |
| Type | Line interactive |
| Input Voltage Range | 170–280V AC |
| Power Method | (1) TN system, 220–240V AC, 6A Max., 50/60 Hz |
| Nominal Input Voltage | 230V AC |
| Output Voltage | 220–240V AC |
| Nominal Output Voltage | 230V AC |
| Frequency Range | AC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 50 Hz ±1 Hz |
| AC Voltage Regulation | ±10% (Battery mode) |
| Transfer Time | 6 ms typical; 10 ms max. (Battery mode) |
| Wave Form | Simulated sine wave (Battery mode) |
| Battery Type | (1) Lead Acid 12V, 9Ah |
| Runtime | Full load: 2 min Half load: 7 min |
| Battery Charging Time | 6-8 hours recovery to 90% capacity |
| Overload at On-Line Mode | 110% 5 min go to fault 120% go to fault immediately |
| Overload at Battery Mode | 110% shutdown in 5 sec 120% shutdown immediately |
| Short Circuit Protection at On-Line Mode | Breaker, 250V AC, 10A |
| Output Short-Circuit Current | Ipeak 401.9A Irms 160.7A |
| Buttons | (1) Power (1) Factory reset |
| LEDs | Status: Off: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery Battery Indicator: All off: 0% (1) Steady blue: battery 1–19% (2) Steady blue: battery 20–39% (3) Steady blue: battery 40–59% (4) Steady blue: battery 60–79% (5) Steady blue: battery 80–100% |
| Operating Altitude | 3,000 m (1.9 mi) |
| Operating Environment | Pollution Degree 2 |
| Ambient Storage Temperature | -20 to 50° C (-4 to 122° F) |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 0 to 95% noncondensing |
| Certifications | CE, IEC 62040-1 |
Description
The UniFi UPS Tower is a 1000 VA / 600 W line-interactive desktop UPS managed from UniFi, with 5 battery-backed and 5 surge-only C13 outlets and a hot-swappable 108 Wh battery.
It supports Graceful Shutdown for UNVR and UNAS, which needs UniFi OS 4.4.3 or later, and NUT for third-party devices. Output on battery is a simulated sine wave. The 10 outlets are IEC C13, so plan C14 cords for equipment with Schuko plugs.
Key features
- 1000 VA / 600 W, line-interactive, 230V
- Up to 7 minutes at half load (300 W) and 2 minutes at full load
- 5 x C13 battery backup/surge and 5 x C13 surge-only outlets, C14 inlet
- Hot-swappable 12V 9Ah lead-acid battery
- 6 ms typical transfer time
- 2 x GbE ports for surge in/out
- 288 x 99 x 280.5 mm, 7.85 kg
Specifications
Mechanical
| Dimensions | 288 x 99 x 280.5 mm (11.3 x 3.9 x 11") |
|---|---|
| Weight | 7.85 kg (17.3 lb) |
| Enclosure Material | Polycarbonate and acrylonitrile butadiene styrene blend |
| Form Factor | Desktop |
| Weatherproofing | IP20 |
Hardware
| Management | Ethernet |
|---|---|
| Networking Interface | (1) 100/10 MbE port for network connection (2) GbE ports for surge in/out |
| Power | (1) OVC II AC in: C14 socket, 1.8 m (5.9 ft) removable power cord (5) Battery backup/surge protection: C13 (5) Surge protection: C13 |
| Capacity | 1,000VA/600W |
| Type | Line interactive |
| Input Voltage Range | 170–280V AC |
| Power Method | (1) TN system, 220–240V AC, 6A Max., 50/60 Hz |
| Nominal Input Voltage | 230V AC |
| Output Voltage | 220–240V AC |
| Nominal Output Voltage | 230V AC |
| Frequency Range | AC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 50 Hz ±1 Hz |
| AC Voltage Regulation | ±10% (Battery mode) |
| Transfer Time | 6 ms typical; 10 ms max. (Battery mode) |
| Wave Form | Simulated sine wave (Battery mode) |
| Battery Type | (1) Lead Acid 12V, 9Ah |
| Runtime | Full load: 2 min Half load: 7 min |
| Battery Charging Time | 6-8 hours recovery to 90% capacity |
| Overload at On-Line Mode | 110% 5 min go to fault 120% go to fault immediately |
| Overload at Battery Mode | 110% shutdown in 5 sec 120% shutdown immediately |
| Short Circuit Protection at On-Line Mode | Breaker, 250V AC, 10A |
| Output Short-Circuit Current | Ipeak 401.9A Irms 160.7A |
| Buttons | (1) Power (1) Factory reset |
| LEDs | Status: Off: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery Battery Indicator: All off: 0% (1) Steady blue: battery 1–19% (2) Steady blue: battery 20–39% (3) Steady blue: battery 40–59% (4) Steady blue: battery 60–79% (5) Steady blue: battery 80–100% |
| Operating Altitude | 3,000 m (1.9 mi) |
| Operating Environment | Pollution Degree 2 |
| Ambient Storage Temperature | -20 to 50° C (-4 to 122° F) |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 0 to 95% noncondensing |
| Certifications | CE, IEC 62040-1 |