NetPatch 10" 1U Rack Mount for UniFi Switch Ultra
€19,90 €24,48 Incl. VAT
A 10" 1U rack mount for the UniFi Switch Ultra, designed and 3D-printed by NetPatch. The switch slides in from the front with its ports facing out and sits flush with the panel, held by a spring latch on each side.
The latches close around the switch's rounded front corners, so it can't slide forward out of the rack, and two lips over its top edges stop it lifting. To take it out, push it forward firmly from behind and the latches open. It fits the USW-Ultra on its own and the versions sold with a 60 W or 210 W power supply.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws, and the ear slots allow 5 mm of side-to-side play. The switch is too wide to leave room for keystone ports. Rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Switch Ultra (USW-Ultra, USW-Ultra-60W, USW-Ultra-210W)
- 1U, 254 mm (10") wide, 81 mm deep
- Spring latch on both sides, switch front flush with the panel
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
| Compatible devices | UniFi Switch Ultra (USW-Ultra, USW-Ultra-60W, USW-Ultra-210W) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 81 mm |
| Retention | Spring latch on both sides, top lips |
| Device position | Front flush with the panel |
| Keystone ports | None |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
Which switches does this mount fit?
The UniFi Switch Ultra: the USW-Ultra on its own and the versions sold with a 60 W or 210 W power supply (USW-Ultra-60W, USW-Ultra-210W). It is shaped around that switch and does not fit other models.
What rack does it need?
A 10" rack. The mount uses 1U, is 81 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included. The ear slots give 5 mm of side-to-side play.
How does the switch stay in, and how do I take it out?
It slides in from the front and a spring latch on each side closes around its rounded front corners, with two lips over its top edges. No tools are needed. To take it out, push it forward firmly from behind and the latches open.
Does it have keystone ports?
No. The Switch Ultra is too wide to leave room for them. The mounts for the Switch Lite 8 PoE and the Cloud Gateway Ultra / Max come with a keystone port on each side.
What options are there?
Black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.
Description
A 10" 1U rack mount for the UniFi Switch Ultra, designed and 3D-printed by NetPatch. The switch slides in from the front with its ports facing out and sits flush with the panel, held by a spring latch on each side.
The latches close around the switch's rounded front corners, so it can't slide forward out of the rack, and two lips over its top edges stop it lifting. To take it out, push it forward firmly from behind and the latches open. It fits the USW-Ultra on its own and the versions sold with a 60 W or 210 W power supply.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws, and the ear slots allow 5 mm of side-to-side play. The switch is too wide to leave room for keystone ports. Rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Switch Ultra (USW-Ultra, USW-Ultra-60W, USW-Ultra-210W)
- 1U, 254 mm (10") wide, 81 mm deep
- Spring latch on both sides, switch front flush with the panel
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
Specifications
| Compatible devices | UniFi Switch Ultra (USW-Ultra, USW-Ultra-60W, USW-Ultra-210W) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 81 mm |
| Retention | Spring latch on both sides, top lips |
| Device position | Front flush with the panel |
| Keystone ports | None |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
FAQ
Which switches does this mount fit?
The UniFi Switch Ultra: the USW-Ultra on its own and the versions sold with a 60 W or 210 W power supply (USW-Ultra-60W, USW-Ultra-210W). It is shaped around that switch and does not fit other models.
What rack does it need?
A 10" rack. The mount uses 1U, is 81 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included. The ear slots give 5 mm of side-to-side play.
How does the switch stay in, and how do I take it out?
It slides in from the front and a spring latch on each side closes around its rounded front corners, with two lips over its top edges. No tools are needed. To take it out, push it forward firmly from behind and the latches open.
Does it have keystone ports?
No. The Switch Ultra is too wide to leave room for them. The mounts for the Switch Lite 8 PoE and the Cloud Gateway Ultra / Max come with a keystone port on each side.
What options are there?
Black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.