NetPatch 10" 1U Rack Mount for UniFi Switch Lite 8 PoE
€19,90 €24,48 Incl. VAT
A 10" 1U rack mount for the UniFi Switch Lite 8 PoE, designed and 3D-printed by NetPatch. The switch slides in from the front with its ports facing out and sits flush with the panel, held by a spring latch on each side.
The latches close around the switch's rounded front corners, so it can't slide forward out of the rack, and two lips over its top edges stop it lifting. To take it out, push it forward firmly from behind and the latches open.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws, and the ear slots allow 5 mm of side-to-side play. Keystone modules and rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Switch Lite 8 PoE (USW-Lite-8-PoE)
- 1U, 254 mm (10") wide, 103 mm deep
- Spring latch on both sides, switch front flush with the panel
- With or without a keystone port on each side of the switch
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
| Compatible devices | UniFi Switch Lite 8 PoE (USW-Lite-8-PoE) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 103 mm |
| Retention | Spring latch on both sides, top lips |
| Device position | Front flush with the panel |
| Keystone ports | 2 or none, depending on the version (modules not included) |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
Which switch does this mount fit?
The UniFi Switch Lite 8 PoE (USW-Lite-8-PoE). It is shaped around that switch and does not fit other models.
What rack does it need?
A 10" rack. The mount uses 1U, is 103 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included. The ear slots give 5 mm of side-to-side play.
How does the switch stay in, and how do I take it out?
It slides in from the front and a spring latch on each side closes around its rounded front corners, with two lips over its top edges. No tools are needed. To take it out, push it forward firmly from behind and the latches open.
Are the keystone modules included?
No. The keystone version has a port on each side of the switch for standard keystone modules, which you add yourself. There is also a version without keystone ports.
What options are there?
With or without keystone ports, black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.
Description
A 10" 1U rack mount for the UniFi Switch Lite 8 PoE, designed and 3D-printed by NetPatch. The switch slides in from the front with its ports facing out and sits flush with the panel, held by a spring latch on each side.
The latches close around the switch's rounded front corners, so it can't slide forward out of the rack, and two lips over its top edges stop it lifting. To take it out, push it forward firmly from behind and the latches open.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws, and the ear slots allow 5 mm of side-to-side play. Keystone modules and rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Switch Lite 8 PoE (USW-Lite-8-PoE)
- 1U, 254 mm (10") wide, 103 mm deep
- Spring latch on both sides, switch front flush with the panel
- With or without a keystone port on each side of the switch
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
Specifications
| Compatible devices | UniFi Switch Lite 8 PoE (USW-Lite-8-PoE) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 103 mm |
| Retention | Spring latch on both sides, top lips |
| Device position | Front flush with the panel |
| Keystone ports | 2 or none, depending on the version (modules not included) |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
FAQ
Which switch does this mount fit?
The UniFi Switch Lite 8 PoE (USW-Lite-8-PoE). It is shaped around that switch and does not fit other models.
What rack does it need?
A 10" rack. The mount uses 1U, is 103 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included. The ear slots give 5 mm of side-to-side play.
How does the switch stay in, and how do I take it out?
It slides in from the front and a spring latch on each side closes around its rounded front corners, with two lips over its top edges. No tools are needed. To take it out, push it forward firmly from behind and the latches open.
Are the keystone modules included?
No. The keystone version has a port on each side of the switch for standard keystone modules, which you add yourself. There is also a version without keystone ports.
What options are there?
With or without keystone ports, black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.