NetPatch 10" 1U Rack Mount for UniFi Cloud Gateway Fiber
€19,90 €24,48 Incl. VAT
A 10" 1U rack mount for the UniFi Cloud Gateway Fiber, designed and 3D-printed by NetPatch. The gateway sits in a tray behind the panel with its ports showing through the window, so it fits a 10" rack without a shelf.
The UCG-Fiber is too wide for the side latches our other mounts use, so it tilts in from above instead. Set its front on the lip under the window, rock it down, and its back drops in behind two short walls at the rear corners. The lip and the walls keep it from sliding forward or back, and the open sides let you grip it to lift it out. The middle of the back stays open for cables.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws. The gateway is too wide to leave room for keystone ports. Rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Cloud Gateway Fiber (UCG-Fiber)
- 1U, 254 mm (10") wide, 131 mm deep
- Tilt-in tray with a front lip and rear corner walls, no tools needed
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
| Compatible devices | UniFi Cloud Gateway Fiber (UCG-Fiber) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 131 mm |
| Retention | Tilt-in tray: lip under the window, walls at the rear corners |
| Device position | Front flush with the panel |
| Keystone ports | None |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
Which gateway does this mount fit?
The UniFi Cloud Gateway Fiber (UCG-Fiber). For the Cloud Gateway Ultra or Max, use the NetPatch mount made for those.
How does the gateway go in?
It tilts in from above. Set its front on the lip under the window, rock it down, and its back drops in behind two short walls at the rear corners. The lip and the walls stop it sliding forward or back. No tools are needed, and the open sides let you grip it to lift it out.
Why doesn't it use spring latches like the other NetPatch mounts?
The UCG-Fiber is too wide for side latches in a 10" panel, so this mount holds it in a tray instead. The front still sits flush with the panel, with the ports showing through the window.
What rack does it need?
A 10" rack. The mount uses 1U, is 131 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included.
Does it have keystone ports?
No. The gateway is too wide to leave room for them. The middle of the back stays open for cables.
What options are there?
Black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.
Description
A 10" 1U rack mount for the UniFi Cloud Gateway Fiber, designed and 3D-printed by NetPatch. The gateway sits in a tray behind the panel with its ports showing through the window, so it fits a 10" rack without a shelf.
The UCG-Fiber is too wide for the side latches our other mounts use, so it tilts in from above instead. Set its front on the lip under the window, rock it down, and its back drops in behind two short walls at the rear corners. The lip and the walls keep it from sliding forward or back, and the open sides let you grip it to lift it out. The middle of the back stays open for cables.
The panel fits 10" racks with M6 cage nuts or 10-32 rack screws. The gateway is too wide to leave room for keystone ports. Rack screws are not included. The images show renders of the mount with a stand-in device.
Key features
- Fits the UniFi Cloud Gateway Fiber (UCG-Fiber)
- 1U, 254 mm (10") wide, 131 mm deep
- Tilt-in tray with a front lip and rear corner walls, no tools needed
- Honeycomb or open-slot floor
- 3D-printed by NetPatch in black or white PETG
Specifications
| Compatible devices | UniFi Cloud Gateway Fiber (UCG-Fiber) |
|---|---|
| Rack size | 10" (254 mm) |
| Height | 1U |
| Depth | 131 mm |
| Retention | Tilt-in tray: lip under the window, walls at the rear corners |
| Device position | Front flush with the panel |
| Keystone ports | None |
| Floor | Honeycomb or open slot |
| Rack fixing | M6 cage nuts or 10-32 screws (not included) |
| Material | PETG, 3D-printed |
| Colours | Black, white |
FAQ
Which gateway does this mount fit?
The UniFi Cloud Gateway Fiber (UCG-Fiber). For the Cloud Gateway Ultra or Max, use the NetPatch mount made for those.
How does the gateway go in?
It tilts in from above. Set its front on the lip under the window, rock it down, and its back drops in behind two short walls at the rear corners. The lip and the walls stop it sliding forward or back. No tools are needed, and the open sides let you grip it to lift it out.
Why doesn't it use spring latches like the other NetPatch mounts?
The UCG-Fiber is too wide for side latches in a 10" panel, so this mount holds it in a tray instead. The front still sits flush with the panel, with the ports showing through the window.
What rack does it need?
A 10" rack. The mount uses 1U, is 131 mm deep and fixes with M6 cage nuts or 10-32 rack screws, which are not included.
Does it have keystone ports?
No. The gateway is too wide to leave room for them. The middle of the back stays open for cables.
What options are there?
Black or white PETG, and a honeycomb or open-slot floor. NetPatch designs and 3D-prints it.