MikroTik CRS520-4XS-16XQ-RM 100G Switch
€1.544,63 €1.899,89 Incl. VAT
The MikroTik CRS520-4XS-16XQ-RM is a 1U rackmount switch with 16 x 100G QSFP28 ports, 4 x 25G SFP28 ports and two 10G Ethernet ports.
It uses the quad-core 2 GHz ARM CPU from the CCR range with 4 GB of DDR4 RAM, so it can also run OSPF/BGP, management VPNs and Layer 3 hardware-offloaded routing on RouterOS v7. Two hot-swap power supplies and four hot-swap fans are included. A -48 V DC telecom supply (PW48V-12V150W) is available separately.
Key features
- 16 x QSFP28 ports (100G)
- 4 x SFP28 ports (25G)
- 2 x 10G Ethernet ports
- Quad-core AL52400 CPU at 2 GHz, 4 GB RAM
- Two hot-swap 100-240 V AC PSUs, four hot-swap fans
- RJ45 serial console, 150 W maximum (220 W with both PSUs)
In the box
- 2 x IEC power cords
- Rack ears
- Rear rack support ears
- Cable management brackets
- K-82 fastening set
General
| Architecture | ARM 64bit |
|---|---|
| CPU | AL52400 |
| CPU core count | 4 |
| CPU nominal frequency | 2 GHz |
| CPU Threads count | 4 |
| Switch chip model | 98CX8410 |
| RouterOS license | 5 |
| Operating System | RouterOS v7 |
| Size of RAM | 4 GB |
| Storage size | 128 MB |
| Storage type | NAND |
| MTBF | Approximately 200'000 hours at 25C |
| Tested ambient temperature | -20°C to 50°C |
Powering
| Number of AC inputs | 2 |
|---|---|
| AC input range | 100-240 |
| Number of PSU slots | 2 |
| Frequency (Hz) | 50-60 |
| Max power consumption | 150 W (220 W with both PSUs) |
| Max power consumption without attachments | 123 W |
| Cooling type | 4 fans |
Ethernet
| Number of 1G/2.5G/5G/10G Ethernet ports | 2 (supported: 10M/100M/1G/10G) |
|---|
Fiber
| Number of 25G SFP28 ports | 4 |
|---|---|
| Number of 100G QSFP28 ports | 16 |
Peripherals
| Serial console port | RJ45 |
|---|
Other
| CPU temperature monitor | Yes |
|---|---|
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Certification & Approvals
| Certification | CE, EAC, ROHS |
|---|---|
| IP | 20 |
Description
The MikroTik CRS520-4XS-16XQ-RM is a 1U rackmount switch with 16 x 100G QSFP28 ports, 4 x 25G SFP28 ports and two 10G Ethernet ports.
It uses the quad-core 2 GHz ARM CPU from the CCR range with 4 GB of DDR4 RAM, so it can also run OSPF/BGP, management VPNs and Layer 3 hardware-offloaded routing on RouterOS v7. Two hot-swap power supplies and four hot-swap fans are included. A -48 V DC telecom supply (PW48V-12V150W) is available separately.
Key features
- 16 x QSFP28 ports (100G)
- 4 x SFP28 ports (25G)
- 2 x 10G Ethernet ports
- Quad-core AL52400 CPU at 2 GHz, 4 GB RAM
- Two hot-swap 100-240 V AC PSUs, four hot-swap fans
- RJ45 serial console, 150 W maximum (220 W with both PSUs)
In the box
- 2 x IEC power cords
- Rack ears
- Rear rack support ears
- Cable management brackets
- K-82 fastening set
Specifications
General
| Architecture | ARM 64bit |
|---|---|
| CPU | AL52400 |
| CPU core count | 4 |
| CPU nominal frequency | 2 GHz |
| CPU Threads count | 4 |
| Switch chip model | 98CX8410 |
| RouterOS license | 5 |
| Operating System | RouterOS v7 |
| Size of RAM | 4 GB |
| Storage size | 128 MB |
| Storage type | NAND |
| MTBF | Approximately 200'000 hours at 25C |
| Tested ambient temperature | -20°C to 50°C |
Powering
| Number of AC inputs | 2 |
|---|---|
| AC input range | 100-240 |
| Number of PSU slots | 2 |
| Frequency (Hz) | 50-60 |
| Max power consumption | 150 W (220 W with both PSUs) |
| Max power consumption without attachments | 123 W |
| Cooling type | 4 fans |
Ethernet
| Number of 1G/2.5G/5G/10G Ethernet ports | 2 (supported: 10M/100M/1G/10G) |
|---|
Fiber
| Number of 25G SFP28 ports | 4 |
|---|---|
| Number of 100G QSFP28 ports | 16 |
Peripherals
| Serial console port | RJ45 |
|---|
Other
| CPU temperature monitor | Yes |
|---|---|
| PCB temperature monitor | Yes |
| Voltage Monitor | Yes |
Certification & Approvals
| Certification | CE, EAC, ROHS |
|---|---|
| IP | 20 |