Ethernet Cable Cat.8.1 S/FTP LSZH – 22AWG
€856,00 €1.052,88 Incl. VAT
barpa Cat.8.1 S/FTP data centre cable: foil-screened pairs under a tinned copper braid, 22 AWG copper conductors and an LSZH jacket. Specified to 2000 MHz for Class I links, including 25GBASE-T and 40GBASE-T.
Cat.8.1 is for short links inside the data centre. Under IEEE 802.3bq and TIA, 25GBASE-T and 40GBASE-T run over a channel of up to 30 m, with a permanent link of up to 24 m, and barpa specifies this cable's performance over 30 m. It terminates on Cat.8.1 connectors, which keep the RJ45 interface. Its 22 AWG conductors and 8.3 mm nominal jacket are within the range of the barpa Cat.8.1 shielded keystone and Cat.8.1 field termination plug, which both take 22-24 AWG conductors and cable up to 8.5 mm. For longer horizontal runs, Cat.6A is the usual choice.
It supports PoE, PoE+, PoE++ and 4PPoE, and the jacket has descending metre marking. CPR class B2ca-s1a,d1,a1. Sold as a full 305 m reel or cut to the length you need.
Key features
- Category 8.1 S/FTP, 2000 MHz
- Class I, 25GBASE-T and 40GBASE-T up to 30 m
- Foil on each pair plus tinned copper braid
- 22 AWG copper conductors, 0.63 mm
- LSZH jacket, 8.3 mm, blue (RAL 5002)
- CPR class B2ca-s1a,d1,a1
- PoE to IEEE 802.3bt Type 1, 2, 3 and 4
General
| Category | Cat.8.1 S/FTP |
|---|---|
| Max. frequency | 2000 MHz |
| Applications | Class I, 25GBASE-T, 40GBASE-T |
| Performance specified over | 30 m |
| CPR class | B2ca-s1a,d1,a1 |
| Available lengths | 305 m (reel), 100 m, 50 m, 20 m, per metre |
Construction
| Conductor | Copper, 22 AWG, 0.63 ± 0.01 mm |
|---|---|
| Insulation | Skin-foam-skin PE, 1.58 ± 0.10 mm |
| Shielding | Al/Mylar foil on each pair, overall tinned copper braid (≥ 60% coverage) |
| Jacket | LSZH, 0.60 mm thick |
| Outer diameter | 8.3 ± 0.5 mm |
| Jacket colour | Blue (RAL 5002) |
| Rip cord | Yes |
| Metre marking | Descending |
Electrical (20 °C)
| Impedance | 100 ± 5 Ω (1-100 MHz), 100 ± 22 Ω (100-250 MHz), 100 ± 25 Ω (250-2000 MHz) |
|---|---|
| DC resistance | 6.98 Ω/100 m |
| NVP | 72% |
| Delay skew | 25 ns/100 m |
| PoE | IEEE 802.3bt Type 1, 2, 3 and 4 |
Installation
| Operating temperature | -20 to 75 °C |
|---|---|
| Installation temperature | 0 to 50 °C |
| Min. bend radius (operation) | 4 x cable diameter |
| Max. pulling tension | 100 N |
Standards
| Electrical performance | ISO/IEC 11801, EN 50173, EN 50288-12-1, ANSI/TIA-568.2-D |
|---|---|
| Fire behaviour | IEC 60332-1, IEC 60754-2, IEC 61034-2, EN 50399, EN 50575 |
Description
barpa Cat.8.1 S/FTP data centre cable: foil-screened pairs under a tinned copper braid, 22 AWG copper conductors and an LSZH jacket. Specified to 2000 MHz for Class I links, including 25GBASE-T and 40GBASE-T.
Cat.8.1 is for short links inside the data centre. Under IEEE 802.3bq and TIA, 25GBASE-T and 40GBASE-T run over a channel of up to 30 m, with a permanent link of up to 24 m, and barpa specifies this cable's performance over 30 m. It terminates on Cat.8.1 connectors, which keep the RJ45 interface. Its 22 AWG conductors and 8.3 mm nominal jacket are within the range of the barpa Cat.8.1 shielded keystone and Cat.8.1 field termination plug, which both take 22-24 AWG conductors and cable up to 8.5 mm. For longer horizontal runs, Cat.6A is the usual choice.
It supports PoE, PoE+, PoE++ and 4PPoE, and the jacket has descending metre marking. CPR class B2ca-s1a,d1,a1. Sold as a full 305 m reel or cut to the length you need.
Key features
- Category 8.1 S/FTP, 2000 MHz
- Class I, 25GBASE-T and 40GBASE-T up to 30 m
- Foil on each pair plus tinned copper braid
- 22 AWG copper conductors, 0.63 mm
- LSZH jacket, 8.3 mm, blue (RAL 5002)
- CPR class B2ca-s1a,d1,a1
- PoE to IEEE 802.3bt Type 1, 2, 3 and 4
Specifications
General
| Category | Cat.8.1 S/FTP |
|---|---|
| Max. frequency | 2000 MHz |
| Applications | Class I, 25GBASE-T, 40GBASE-T |
| Performance specified over | 30 m |
| CPR class | B2ca-s1a,d1,a1 |
| Available lengths | 305 m (reel), 100 m, 50 m, 20 m, per metre |
Construction
| Conductor | Copper, 22 AWG, 0.63 ± 0.01 mm |
|---|---|
| Insulation | Skin-foam-skin PE, 1.58 ± 0.10 mm |
| Shielding | Al/Mylar foil on each pair, overall tinned copper braid (≥ 60% coverage) |
| Jacket | LSZH, 0.60 mm thick |
| Outer diameter | 8.3 ± 0.5 mm |
| Jacket colour | Blue (RAL 5002) |
| Rip cord | Yes |
| Metre marking | Descending |
Electrical (20 °C)
| Impedance | 100 ± 5 Ω (1-100 MHz), 100 ± 22 Ω (100-250 MHz), 100 ± 25 Ω (250-2000 MHz) |
|---|---|
| DC resistance | 6.98 Ω/100 m |
| NVP | 72% |
| Delay skew | 25 ns/100 m |
| PoE | IEEE 802.3bt Type 1, 2, 3 and 4 |
Installation
| Operating temperature | -20 to 75 °C |
|---|---|
| Installation temperature | 0 to 50 °C |
| Min. bend radius (operation) | 4 x cable diameter |
| Max. pulling tension | 100 N |
Standards
| Electrical performance | ISO/IEC 11801, EN 50173, EN 50288-12-1, ANSI/TIA-568.2-D |
|---|---|
| Fire behaviour | IEC 60332-1, IEC 60754-2, IEC 61034-2, EN 50399, EN 50575 |