Barpa Field Termination RJ45 Plug Cat.8.1 STP
€24,22 €29,79 Incl. VAT
A shielded Cat.8.1 RJ45 plug from barpa that you terminate on site, for making patch cords of any length. barpa makes it mainly for industrial use.
The cable goes through a screw-on boot, the braid is folded back under a copper foil tape, and the conductors are laid in a numbered aligner, trimmed and pressed into the plug. The plug takes 22-24 AWG conductors with 1.2-1.7 mm insulation and cable from 7.0 to 8.5 mm, so check your cable before ordering.
Cat.8.1 is meant for short links where 25GBASE-T and 40GBASE-T run over a channel of up to 30 m (IEEE 802.3bq). The plug fits any RJ45 port, but 25G or 40G needs Cat.8.1 cable and connectors throughout and switch ports that support 25GBASE-T or 40GBASE-T, which very few switches have.
Key features
- Category 8.1, shielded (STP), 2000 MHz, 40 Gigabit Ethernet
- Field termination, T568A or T568B
- Nickel-plated die-cast zinc housing, 50 µ" gold-plated RJ45 contacts
- For 22-24 AWG conductors, cable diameter 7.0-8.5 mm
- PoE to IEEE 802.3bt Type 1, 2, 3 and 4
- 750 or more insertion cycles, IP20
In the box
- 1 x RJ45 Cat.8.1 STP plug
- Screw-on boot
- Wire aligner
- Copper foil tape
- Protective cap
General
| Category | Cat.8.1, shielded (STP) |
|---|---|
| Max. frequency | 2000 MHz |
| Termination | Field-terminable, with wire aligner |
| Wiring | T568A/B |
| Pins | 8 |
| Cable exit | 180° |
| Colour | Silver |
| Sold as | Single plug |
Construction
| Housing | Die-cast zinc, nickel-plated |
|---|---|
| IDC contacts | Phosphor bronze, tin-plated |
| RJ45 contacts | Phosphor bronze, 50 µ" gold plating |
| Conductors | 22-24 AWG |
| Conductor insulation diameter | 1.2-1.7 mm |
| Cable outer diameter | 7.0-8.5 mm |
| Insertion cycles | 750 or more |
| Insertion force | ≤ 30 N |
| Length | 56.0 mm |
Electrical
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Conductor insulation resistance | ≥ 500 MΩ |
| Test voltage, contact to contact | 1000 V, 60 s |
| Test voltage, contact to shield | 1500 V, 60 s |
| PoE | IEEE 802.3bt Type 1, 2, 3 and 4 |
Environment
| Ingress protection | IP20 |
|---|---|
| Operating temperature | -10 to 60 °C |
| Storage temperature | -40 to 60 °C |
Standards
| Standards | IEC 60603-7-81, ISO/IEC 11801, EN 50173-1, ANSI/TIA-568.2-D, IEC 60512-99-002, UL 1863, UL 2043 |
|---|---|
| Flammability | UL 94 V-0 |
Description
A shielded Cat.8.1 RJ45 plug from barpa that you terminate on site, for making patch cords of any length. barpa makes it mainly for industrial use.
The cable goes through a screw-on boot, the braid is folded back under a copper foil tape, and the conductors are laid in a numbered aligner, trimmed and pressed into the plug. The plug takes 22-24 AWG conductors with 1.2-1.7 mm insulation and cable from 7.0 to 8.5 mm, so check your cable before ordering.
Cat.8.1 is meant for short links where 25GBASE-T and 40GBASE-T run over a channel of up to 30 m (IEEE 802.3bq). The plug fits any RJ45 port, but 25G or 40G needs Cat.8.1 cable and connectors throughout and switch ports that support 25GBASE-T or 40GBASE-T, which very few switches have.
Key features
- Category 8.1, shielded (STP), 2000 MHz, 40 Gigabit Ethernet
- Field termination, T568A or T568B
- Nickel-plated die-cast zinc housing, 50 µ" gold-plated RJ45 contacts
- For 22-24 AWG conductors, cable diameter 7.0-8.5 mm
- PoE to IEEE 802.3bt Type 1, 2, 3 and 4
- 750 or more insertion cycles, IP20
In the box
- 1 x RJ45 Cat.8.1 STP plug
- Screw-on boot
- Wire aligner
- Copper foil tape
- Protective cap
Specifications
General
| Category | Cat.8.1, shielded (STP) |
|---|---|
| Max. frequency | 2000 MHz |
| Termination | Field-terminable, with wire aligner |
| Wiring | T568A/B |
| Pins | 8 |
| Cable exit | 180° |
| Colour | Silver |
| Sold as | Single plug |
Construction
| Housing | Die-cast zinc, nickel-plated |
|---|---|
| IDC contacts | Phosphor bronze, tin-plated |
| RJ45 contacts | Phosphor bronze, 50 µ" gold plating |
| Conductors | 22-24 AWG |
| Conductor insulation diameter | 1.2-1.7 mm |
| Cable outer diameter | 7.0-8.5 mm |
| Insertion cycles | 750 or more |
| Insertion force | ≤ 30 N |
| Length | 56.0 mm |
Electrical
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Conductor insulation resistance | ≥ 500 MΩ |
| Test voltage, contact to contact | 1000 V, 60 s |
| Test voltage, contact to shield | 1500 V, 60 s |
| PoE | IEEE 802.3bt Type 1, 2, 3 and 4 |
Environment
| Ingress protection | IP20 |
|---|---|
| Operating temperature | -10 to 60 °C |
| Storage temperature | -40 to 60 °C |
Standards
| Standards | IEC 60603-7-81, ISO/IEC 11801, EN 50173-1, ANSI/TIA-568.2-D, IEC 60512-99-002, UL 1863, UL 2043 |
|---|---|
| Flammability | UL 94 V-0 |