Barpa RJ45 Cat.6A Pass-Through Plug (50-Pack)
€18,50 €22,76 Incl. VAT
Pass-through RJ45 plugs from barpa for Cat.6 and Cat.6A cable, rated up to 500 MHz. The conductors pass right through the front of the plug, so you can check the wire order before crimping. Sold in bags of 50.
barpa specifies its RJ45 modular plug crimp tool for these plugs: it crimps the plug and trims the excess conductors in one stroke. The UTP version takes 23-24 AWG conductors and 5.4-7.1 mm cable. The STP version takes 23 AWG conductors and 7.3-7.6 mm cable, has a copper-nickel alloy shield and uses a separate wire aligner. barpa's coloured plug boots for UTP and STP plugs go on the cable before the plug.
Key features
- Cat.6A, up to 500 MHz, for Cat.6 and Cat.6A cable
- Pass-through design, excess conductors trimmed by the crimp tool
- UTP version for 23-24 AWG conductors and 5.40-7.10 mm cable
- STP version for 23 AWG conductors and 7.30-7.60 mm cable, copper-nickel alloy shield
- Copper alloy contacts with 50 µ" gold plating, 1200 insertion cycles
- Bag of 50 plugs
General
| Category | Cat.6A, up to 500 MHz |
|---|---|
| Cable compatibility | Cat.6 and Cat.6A |
| Design | Pass-through |
| Available versions | UTP (unshielded), STP (shielded) |
| Pack size | 50 |
| Recommended tool | barpa RJ45 modular plug crimp tool |
Construction
| Material | Polycarbonate (PC), transparent |
|---|---|
| Contacts | Copper alloy, 50 µ" gold plating |
| Shield (STP) | Copper-nickel alloy |
| Conductor size | UTP: 23-24 AWG STP: 23 AWG |
| Conductor insulation diameter | UTP: 0.92-1.12 mm STP: 1.33 mm |
| Cable outer diameter | UTP: 5.40-7.10 mm STP: 7.30-7.60 mm |
| Dimensions | 21.49 x 11.68 x 10.69 mm |
| Weight per plug | UTP: 1.4 g STP: 2.7 g |
| Insertion cycles | 1200 |
Electrical
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | 500 MΩ |
| Rated voltage | 250 V |
| Rated current | 2 A |
| Dielectric strength | 1000 V AC (1 min) |
Environment
| Operating temperature | -40 to +70 °C |
|---|
Standards
| Standards | UL94V-2, ANSI/TIA-1096-A, IEC 60603-7, EN 60998-1:2004, RoHS (2011/65/EU) |
|---|
Description
Pass-through RJ45 plugs from barpa for Cat.6 and Cat.6A cable, rated up to 500 MHz. The conductors pass right through the front of the plug, so you can check the wire order before crimping. Sold in bags of 50.
barpa specifies its RJ45 modular plug crimp tool for these plugs: it crimps the plug and trims the excess conductors in one stroke. The UTP version takes 23-24 AWG conductors and 5.4-7.1 mm cable. The STP version takes 23 AWG conductors and 7.3-7.6 mm cable, has a copper-nickel alloy shield and uses a separate wire aligner. barpa's coloured plug boots for UTP and STP plugs go on the cable before the plug.
Key features
- Cat.6A, up to 500 MHz, for Cat.6 and Cat.6A cable
- Pass-through design, excess conductors trimmed by the crimp tool
- UTP version for 23-24 AWG conductors and 5.40-7.10 mm cable
- STP version for 23 AWG conductors and 7.30-7.60 mm cable, copper-nickel alloy shield
- Copper alloy contacts with 50 µ" gold plating, 1200 insertion cycles
- Bag of 50 plugs
Specifications
General
| Category | Cat.6A, up to 500 MHz |
|---|---|
| Cable compatibility | Cat.6 and Cat.6A |
| Design | Pass-through |
| Available versions | UTP (unshielded), STP (shielded) |
| Pack size | 50 |
| Recommended tool | barpa RJ45 modular plug crimp tool |
Construction
| Material | Polycarbonate (PC), transparent |
|---|---|
| Contacts | Copper alloy, 50 µ" gold plating |
| Shield (STP) | Copper-nickel alloy |
| Conductor size | UTP: 23-24 AWG STP: 23 AWG |
| Conductor insulation diameter | UTP: 0.92-1.12 mm STP: 1.33 mm |
| Cable outer diameter | UTP: 5.40-7.10 mm STP: 7.30-7.60 mm |
| Dimensions | 21.49 x 11.68 x 10.69 mm |
| Weight per plug | UTP: 1.4 g STP: 2.7 g |
| Insertion cycles | 1200 |
Electrical
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | 500 MΩ |
| Rated voltage | 250 V |
| Rated current | 2 A |
| Dielectric strength | 1000 V AC (1 min) |
Environment
| Operating temperature | -40 to +70 °C |
|---|
Standards
| Standards | UL94V-2, ANSI/TIA-1096-A, IEC 60603-7, EN 60998-1:2004, RoHS (2011/65/EU) |
|---|